There are many reasons why uPVC door handles may no longer work properly. This can be very inconvenient and concerning to think that you may have to go through the expense of replacing the entire door. However, there are a number of ways that even those with no knowledge of windows and doors can attempt to fix the problem with their uPVC door handle.

Problems With uPVC Door Handles

Problems with door handles may happen because of extensive use or may just occur gradually over time. sliding door set

There are two main problems that people notice with their door handles; either the door may have trouble unlocking or unlatching, or there may be problems with the lock becoming stuck in the deadbolt which will make it quite difficult to open the door.

• The screws in the door may be too tight which will prevent the spring from working correctly. 
• The handle may be prevented from working properly if there is not enough clearance behind the back plate - this will stop the handle from turning. 
• The spring mechanism may fail inside the lock or lever handle. 
• The internal springs may not be adequately lubricated which may cause the internal springs of the handle to become bound against the inside of the handle back plate.

How can I fix my uPVC Door Handle?

Try removing and then cleaning the handle.

• Slightly loosen the screws that hold the handle to the door itself. Hopefully this will make the handle turn more easily.

• Take the handle off the door and attempt to operate it while holding the back plate. If the handle does not work as it should, try lubricating the mechanism with grease. This should allow the handle to work and turn freely again.

• If the problem is that the door is not latching shut properly, this could mean that the spring mechanism inside the lock has failed. To test for this problem, take the latch off of the door and try pressing it with your finger. This will need to be replaced if it does not spring back fully or does so but very slowly.

These are only a few hints and tips on how to repair door handles, you may need more than a replacement and if so it may be time to consider replacing the door as a whole for a more modern variant. There are many companies who can fit a new composite door, or indeed it is possible to order bespoke doors online and fit them yourself.